Customization: | Available |
---|---|
After-sales Service: | 48 Hours |
Warranty: | 12 Months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Machine features:
Proportional oil system design,good stability,stable conversion,low failure rate,reliable ,easy to use and safe.
The whole machine body has sufficient rigidity,wear resistance,good guiding accuracy and stability.
Cooperate with the injection device to realize four-stage injection speed and injection pressure,and three-stage holding pressure.
It can meet the requirements of different rubber materials for injection conditions and has rapid production capacity.
Direct pressure structure with fast closing cylinder on both sides in vertical direction.
Two small oil cylinders to achieve fast opening and closing,speed and pressure divided into three digital settings;
The parallelism between upper and lower hot plates is less than 0.08mm.
A master cylinder to achieve clamping force,clamping pressure can be set.
Maximum closing pressure protection.
Precision electronic ruler controls the mode-locking stroke.
Low speed and low pressure controls protect mold safety settings until mold closing is in place.
Type | ZJBH-200T | ZJBH-300T | ZJBH-400T |
Injection volumn (cc) | 2500 | 4000 | 4000 |
Injection pressure (bar) | 1880 | 1800 | 1820 |
Clamping force (Ton) | 200 | 300 | 400 |
Heating plate dimension (mm) | 560*600 | 700*700 | 800*800 |
Opening stroke (mm) | 500 | 550 | 600 |
minimum mold thickness (mm) | 60 | 60 | 110 |
Total power (kw) | 33 | 45 | 55 |
Machine size (m) | 3.5*1.7*2.7 | 3.7*1.8*3 | 5.7*1.8*3 |
Whole weight (Ton) | 7.5 | 9.5 | 12 |
Q1: Where is your factory located?
A1: Hunan Zhongjun Technology Co.,LTD is located at Jinlong High-tech industrial zone ,Yueyang City ,Hunan Province, China