| Customization: | Available |
|---|---|
| After-sales Service: | 48 Hours |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Propotional oil system design,good stability,stable conversion,low failure rate,reliable,easy to use and safe.
2.The high-precision steel structure of the access template is ground and nitried to achieve a high-precision platform surface.
3.The body of the whole equipment has sufficient rigidity ,wear resistance,good guiding accuracy and stability,
4.Vacuum pump,2XZ-15D-15L/S,vacuum degree up to less than or equal to 0.1,suitable for various two-layer or multi-layer molds,with rapd production capacity.
Suitable product
Industrial rubber/Medical/lifestayle/Auto parts
| Type | ZJC-200T | ZJC-250T | ZJC-300T | ZJC-350T | ZJC-400T |
| Clamping force (Ton) | 200 | 250 | 300 | 350 | 400 |
| Heating plate dimension (mm) | 560*600 | 650*600 | 650*700 | 700*700 | 800*800 |
| Opening stroke (mm) | 300 | 300 | 300 | 350 | 400 |
| Main cylinder diameter(mm) | 360 | 400 | 450 | 475 | 520 |
| Motor power (kw) | 7.5*2 | 7.5*2 | 7.5*2 | 11*2 | 11*2 |
| Heating power (kw) | 16.4*2 | 19.8*2 | 24*2 | 24*2 | 31.2*2 |
| Pump rate speed ( Cubic meter/h) | 100 | 100 | 200 | 200 | 200 |
| Molding opening form | Rise And Fall-Mold In And Out -Double Layer Open Mold-Front Top Open Mold(Multi Layer Open Mold) | ||||
| Machine size (m) | 3.5*2.4*2.2 | 3.8*2.5*2.2 | 4.2*3.6*2.3 | 4.5*2.7*2.5 | 5*2.9*2.6 |
| Whole weight (Ton) | 10 | 12 | 14 | 16 | 20 |
The mode-locking part
Direct pressure structure with fast closing cylinder on both sides in vertical direction;
Two small cylinders for fast opening and closing, speed and pressure can be set;
Parallelism between upper and lower templates <=0.05mm ;
Two master cylinders to achieve clamping force, clamping pressure can be set;
Maximum clamping pressure protection;
Up-moving vacuum cover, two vacuum plungers front and rear layout, greater force area;
Before clamping in place, low speed and low pressure control protects mold safety Settings;
Hot plate section
Hlectric heating
High temperature, high pressure insulation board;
Hydraulic system
Highly energy efficient fully matched hydraulic systems;
Hydraulic directional valve, double proportional control;
No power mode locking and pressure preservation;
Complete identification of all oil circuits;
High precision high pressure vane pump ;
Automatic pressure refill function;
Electrical parts
Control system for the world famous industry special Siemens PLC;
10 inch color LCD display;
English button operational panel;
Computer piping and instruments diagram,temperature control accuracy is ± 3 degree;
The function can be controlled by selecting or not using some machine sequence, exhaust action, vulcanization stop, automatic mold opening, mold shifting and other actions, optional;
The electric box is equipped with AC220V/6A multifunctional socket, which can be used for lighting and maintenance According to Chinese standards;
Have manual function,automatic control function ,each function does not interfere with each other ,and some specific functions can be manually controlled in automatic state,which is easy to operate on site;
50 sets of mold data memory and storage ,support English letters input;
Product production information statistics function.
Various information display and alarm.
The operating surface equipped with safety grating;
Three color alarm display light.
Other request
Label assembly
Tank cooling Water cooling by default, can be changed to air cooling according to requirements
Machine appearance, painting, according to the requirements of the demander color matching provided;
Customer request
Site foundation conditions
The device must be installed directly on the concrete floor or secured by anchor bolts.
The installation site must meet the following conditions
Foundation stress :greater than 100KN/square meter
Concrete compression strength greater than 1750 square meter
Concrete depth : greater than 120 mm
Note:if the foundation of the factory device does not meet the requirement,it is recommended to lay steel plate on the ground;
Warmly welcome to our factory !
1-Quality guarantee period:Within 12 months,During this period,if there are troubles with machines,the manufacturer should send engineers to repair or replace the spare part if needed.
2-According to demand of buyer,the supplier send engineers to guide the install and the debug.But the buyer should undertake all cost,such as ticket,food,hotel for supplier,also they need pay 200 USD for engineer one day.
3-For the damage caused by the buyer,supplier provides the spare part and repair it with the best price.
4-If machine is broken up due to the not correct of the buyer within the one year period,supplier can send engineers if need to assist buyer,but buyer should undertake all the cost.
5-Within one year guarantee period,if machine broken down due to its quality itself,supplier should solve this for buyer with its cost.
6-Two parties can discuss other items which are not mentioned in this place.
Q1: Where is your factory located?
A1: Hunan Zhongjun Technology Co.,LTD is located at Jinlong High-tech industrial zone ,Yueyang City ,Hunan Province, China
){kind=link}